| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRDW |
HYDROSTATIC TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J514,TABLE 2-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| SUPP |
SUPPLEMENTARY FEATURES |
REF DATA NSCM F0110 A.M.D.-B.A.982903,FIGURE 20,ITEM 170A,HYDRAULIC SYSTEM,HP |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
TYPE 201-83616 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AARX |
INSIDE DIAMETER |
0.119 INCHES MINIMUM AND 0.131 INCHES MAXIMUM |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBD |
BURST TEST PRESSURE |
10000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.312 INCHES 1ST END |
| ADJS |
EXTERIOR COLOR |
BLACK |
| AAJD |
THREAD CLASS |
2A 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER SPIRALLY WRAPPED POLYAMIDE FABRIC ERR-100 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
1.500 INCHES |
| CRXX |
MEASURING METHOD AND LENGTH |
60.000 INCHES NOMINAL WORKING |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER HELIX, NYLON MONOFILAMENT ERR-100 |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, PHENOLIC RESIN, PAPER BASE |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |