| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABKV |
OUTSIDE DIAMETER |
1.800 INCHES NOMINAL |
| AARX |
INSIDE DIAMETER |
1.510 INCHES NOMINAL |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
1.843 INCHES 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.843 INCHES 2ND END |
| SUPP |
SUPPLEMENTARY FEATURES |
THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES,00624 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 304, COND A |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQBD |
BURST TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.500 INCHES |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, INVERTED FLARE 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| THSD |
THREAD SERIES DESIGNATOR |
UNJS 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, INVERTED FLARE 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJS 2ND END |
| CMLP |
THREAD QUANTITY PER INCH |
14 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| ABJH |
TEMP RATING |
-54.0 DEG CELSIUS SINGLE RESPONSE AND 204.0 DEG CELSIUS SINGLE RESPONSE |
| CRXX |
MEASURING METHOD AND LENGTH |
13.375 INCHES MINIMUM WORKING AND 13.625 INCHES MAXIMUM WORKING |
| CMLP |
THREAD QUANTITY PER INCH |
14 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQRB |
SEAT ANGLE |
8.5 DEGREES 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
750.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQRB |
SEAT ANGLE |
8.5 DEGREES 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 304, COND A |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| FEAT |
SPECIAL FEATURES |
FIRESLEEVE AND DYNATUBE/DUAL-SEAL FITTINGS |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
26512-GH511GE MANUFACTURERS STANDARD |
| CRFY |
FLOW ANGLE |
81.0 DEGREES 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
CONVOLUTED |