| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
BARBED OR SERRATED END 1ST END |
| AWLS |
CONNECTION TYPE |
UNTHREADED EXTERNAL HOSE 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| CRXX |
MEASURING METHOD AND LENGTH |
9.625 INCHES NOMINAL OVERALL |
| CQBD |
BURST TEST PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
C/O HOSE,RUBBER,BLACK,0.250 ID BY 8.380 LG IAW MIL-H-13444,TYPE 1; AND 2-FITTING,SWIVEL,1/4-BSP,60 DEG PN 5-45-5173-1 |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13444,TYPE 1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT AND FUEL RESISTANT AND VIBRATION RESISTANT AND OZONE RESISTANT AND OIL RESISTANT |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| CWDW |
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED |
0.250 INCHES 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
WATER SINGLE RESPONSE |
| ADJS |
EXTERIOR COLOR |
BLACK |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.250 INCHES |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC OR 1ST LAYER WOVEN FABRIC |
| AARX |
INSIDE DIAMETER |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |