| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQJX |
NOMINAL THREAD SIZE |
1.875 INCHES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER ERR-100 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
1.792 INCHES NOMINAL |
| CQQN |
EXTERNAL PROTECTION TYPE AND LOCATION |
OVERALL FIRE SHIELD, SILICONE RUBBER |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| CQBD |
BURST TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
750.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
1.500 INCHES NOMINAL |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.500 INCHES |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
GENERAL MOTORS CORP,ALLISON GAS TURBINE DIV,GENERATOR SET,501K |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
44.000 INCHES NOMINAL WORKING |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CRWL |
INSIDE SURFACE CONDITION |
CONVOLUTED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |