| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
2.750 INCHES NOMINAL 1ST END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.437 INCHES NOMINAL 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRXX |
MEASURING METHOD AND LENGTH |
15.500 INCHES NOMINAL OVERALL |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC |
CONNECTION STYLE |
PLAIN SWIVEL 1ST END |
| AFQN |
FLANGE LENGTH |
3.720 INCHES NOMINAL 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
700.0 POUNDS PER SQUARE INCH |
| AGFF |
FLANGE WIDTH |
1.580 INCHES NOMINAL 1ST END |
| AHNX |
BOLT HOLE DIAMETER |
0.531 INCHES NOMINAL 1ST END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SPLIT 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1400.0 POUNDS PER SQUARE INCH |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER WRAPPED RUBBER, SYNTHETIC ERR-100 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBD |
BURST TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
20.000 INCHES |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| AARX |
INSIDE DIAMETER |
1.500 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED WIRE ERR-100 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CTCJ |
FLANGE STYLE |
DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| ABKV |
OUTSIDE DIAMETER |
2.060 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
3810-01-268-1737 |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
SAE J517,100R1,TYPE A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J518C 191105-24-24S STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ABKU |
FLANGE THICKNESS |
0.315 INCHES NOMINAL 1ST END |