| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS24587 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRDW |
HYDROSTATIC TEST PRESSURE |
4500.0 POUNDS PER SQUARE INCH |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD |
BURST TEST PRESSURE |
9000.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
84.000 INCHES NOMINAL OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.5625 INCHES 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.000 INCHES |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER COTTON ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER WRAPPED RUBBER, SYNTHETIC ERR-100 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AARX |
INSIDE DIAMETER |
0.313 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.672 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE ERR-100 |
| FEAT |
SPECIAL FEATURES |
SLEEVING,ELEC.0.500 ID.WHITE PER M23053-5-108-9 |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY MATERIAL |
| ADJS |
EXTERIOR COLOR |
BLACK OR GRAY |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-8794-6 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |