| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD ERR-100 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| CQBD |
BURST TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
84.000 INCHES NOMINAL OVERALL |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
DIFFERENTIATED BY SPECIAL MARKINGS ON INSULATIN SLEEVING PER MIL-I-23053-5, P/N M23053-5-110-0 |
| ABKV |
OUTSIDE DIAMETER |
0.766 INCHES NOMINAL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE ERR-100 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.620 INCHES |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| AAJD |
THREAD CLASS |
2B 1ST END |
| AARX |
INSIDE DIAMETER |
0.406 INCHES NOMINAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |