| CRXX |
MEASURING METHOD AND LENGTH |
8.500 INCHES NOMINAL WORKING |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
AN8185J-88044 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
STEEL, MIL-T-8808, COMP 321, TYPE 1 |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
385.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR OPEN-PITCH CORRUGATED |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED, QQ-P-35, TYPE 1 |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| AGAV |
END ITEM IDENTIFICATION |
MCDONNELL DOUGLAS C-17A AIRCRAFT |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES 2ND END |
| CQBD |
BURST TEST PRESSURE |
1540.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED, QQ-P-35, TYPE 1 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
AN8185J-88044 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| AARX |
INSIDE DIAMETER |
0.313 INCHES NOMINAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 1ST END |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.510 INCHES NOMINAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
1.560 INCHES |
| CRDW |
HYDROSTATIC TEST PRESSURE |
770.0 POUNDS PER SQUARE INCH |
| ABJH |
TEMP RATING |
-77.0 DEG FAHRENHEIT SINGLE RESPONSE AND 650.0 DEG FAHRENHEIT SINGLE RESPONSE |