| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AGAV |
END ITEM IDENTIFICATION |
4930-01-230-0781 |
| ABKV |
OUTSIDE DIAMETER |
0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AARX |
INSIDE DIAMETER |
0.375 INCHES NOMINAL |
| MEDA |
MEDIA FOR WHICH DESIGNED |
GREASE SINGLE RESPONSE |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-3868-81349 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRXX |
MEASURING METHOD AND LENGTH |
35.500 INCHES NOMINAL WORKING |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-633-CANCELED |
| CQBD |
BURST TEST PRESSURE |
16000.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| ABJH |
TEMP RATING |
-50.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
10500.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
1 TYPE AND 1 STYLE AND A GRADE |
| ADJS |
EXTERIOR COLOR |
BLACK |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS39155-21S STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AHNC |
CONNECTION STYLE |
PLAIN 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |