| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13444, TYPE 3, SIZE 8-81349 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC ERR-100 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
1.750 INCHES |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED WIRE ERR-100 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
32.750 INCHES NOMINAL WORKING |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 2ND END |
| CBBL |
FEATURES PROVIDED |
REUSABLE END FITTINGS |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED FABRIC ERR-100 |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
2320-01-383-3850 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.760 INCHES MAXIMUM |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAE J516, 8-8 241546-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| FEAT |
SPECIAL FEATURES |
END CAPS FOR SHIPPING REQUIRED |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516, 8-8 240146-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQBD |
BURST TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| AARX |
INSIDE DIAMETER |
0.406 INCHES NOMINAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |