| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
1.875 INCHES 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.875 INCHES 2ND END |
| CQBD |
BURST TEST PRESSURE |
1750.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
800.0 POUNDS PER SQUARE INCH |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AARX |
INSIDE DIAMETER |
1.375 INCHES NOMINAL |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE ERR-100 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
42.250 INCHES NOMINAL WORKING |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| ABKV |
OUTSIDE DIAMETER |
1.735 INCHES NOMINAL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, ETHYLENE PROPYLENE |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED |
| AAJD |
THREAD CLASS |
3B 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-83797 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
350.0 |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 2ND END |
| CMLP |
THREAD QUANTITY PER INCH |
12 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
9.000 INCHES |