| ABKV |
OUTSIDE DIAMETER |
1.034 INCHES NOMINAL |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRDW |
HYDROSTATIC TEST PRESSURE |
5500.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
600.0 MILLIMETERS NOMINAL WORKING |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND WEATHERPROOF |
| AAJD |
THREAD CLASS |
2B 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2750.0 POUNDS PER SQUARE INCH |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED WIRE ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
3930-01-384-5310 |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| THSD |
THREAD SERIES DESIGNATOR |
UNS 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
SAE J517,100R2,TYPE AT-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CMLP |
THREAD QUANTITY PER INCH |
14 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CMLP |
THREAD QUANTITY PER INCH |
14 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNS 2ND END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| CQBD |
BURST TEST PRESSURE |
11000.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED WIRE ERR-100 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
8.000 INCHES |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516,TABLE 10A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AARX |
INSIDE DIAMETER |
0.625 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
2B 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 2ND END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAE J516,TABLE 10A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CBBL |
FEATURES PROVIDED |
NONSKIVE |