| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-83797/1-16 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T6 |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 1ST END |
| CQBD |
BURST TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABKV |
OUTSIDE DIAMETER |
1.156 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED, MIL-A-8625 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.500 INCHES |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ABJH |
TEMP RATING |
-40.0 DEG CELSIUS SINGLE RESPONSE AND 149.0 DEG CELSIUS SINGLE RESPONSE |
| CRXX |
MEASURING METHOD AND LENGTH |
128.000 INCHES NOMINAL WORKING |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
0.0 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
750.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AARX |
INSIDE DIAMETER |
0.875 INCHES NOMINAL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AAJD |
THREAD CLASS |
2B 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
CATAPULT/ARRESTING GEAR |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL-H-83798/3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |