| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRXX |
MEASURING METHOD AND LENGTH |
18.250 INCHES NOMINAL WORKING |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AFQN |
FLANGE LENGTH |
3.090 INCHES MINIMUM 1ST END AND 3.160 INCHES MAXIMUM 1ST END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED WIRE ERR-100 |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-390-4683 |
| ABKV |
OUTSIDE DIAMETER |
1.920 INCHES NOMINAL |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 1ST END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J518, TABLE 1A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.188 INCHES NOMINAL 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| CRDW |
HYDROSTATIC TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
16.500 INCHES |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED WIRE ERR-100 |
| AARX |
INSIDE DIAMETER |
1.250 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| AGFF |
FLANGE WIDTH |
2.780 INCHES NOMINAL 1ST END |
| CTCJ |
FLANGE STYLE |
DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
180.0 |
| AHNX |
BOLT HOLE DIAMETER |
0.469 INCHES NOMINAL 1ST END |
| CQBD |
BURST TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
2.312 INCHES NOMINAL 1ST END |
| ABKU |
FLANGE THICKNESS |
0.315 INCHES NOMINAL 1ST END |