| AHNX |
BOLT HOLE DIAMETER |
0.750 INCHES NOMINAL 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
STEEL, CORROSION RESISTING |
| AHNX |
BOLT HOLE DIAMETER |
0.750 INCHES NOMINAL 2ND END |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR CLOSE-PITCH CORRUGATED |
| CQBD |
BURST TEST PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
2.500 INCHES NOMINAL |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
13.000 INCHES |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CTCJ |
FLANGE STYLE |
ROUND W/ BOLT HOLES 1ST END |
| FEAT |
SPECIAL FEATURES |
SECOND END HAS FLOATING FLANGE WHICH MOVES OR ROTATEAFTER ASSEMBLY |
| AGAV |
END ITEM IDENTIFICATION |
ENGINE,AIRCRAFT,F100-PW-100 (F-15A/B/C/D; 4920013901852 |
| ABKV |
OUTSIDE DIAMETER |
3.370 INCHES NOMINAL |
| CTCJ |
FLANGE STYLE |
ROUND W/ BOLT HOLES 2ND END |
| ABJH |
TEMP RATING |
68.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| ABKG |
BOLT CIRCLE DIAMETER |
5.500 INCHES NOMINAL 1ST END |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| ABKG |
BOLT CIRCLE DIAMETER |
5.500 INCHES NOMINAL 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
12.250 INCHES NOMINAL OVERALL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
INCLUDED |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| ABKU |
FLANGE THICKNESS |
0.875 INCHES NOMINAL 1ST END |
| ABKU |
FLANGE THICKNESS |
0.875 INCHES NOMINAL 2ND END |
| AEPR |
FLANGE OUTSIDE DIAMETER |
7.000 INCHES NOMINAL 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CRDW |
HYDROSTATIC TEST PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
PLAIN 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |
| AEPR |
FLANGE OUTSIDE DIAMETER |
7.000 INCHES NOMINAL 2ND END |