| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CTTC |
THREAD TOLERANCE CLASS |
6H INTERNAL 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CTTC |
THREAD TOLERANCE CLASS |
6H INTERNAL 2ND END |
| AARX |
INSIDE DIAMETER |
0.500 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
ISO S 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
ISO S 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND WEATHERPROOF |
| CQBD |
BURST TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| ABJH |
TEMP RATING |
-40.00 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
22.0 MILLIMETERS 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
22.0 MILLIMETERS 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
4.0 KILOPASCALS |
| ABKV |
OUTSIDE DIAMETER |
0.846 INCHES MAXIMUM |
| CQQR |
THREAD PITCH IN MILLIMETERS |
1.500 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| CQQR |
THREAD PITCH IN MILLIMETERS |
1.500 2ND END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
1400.0 MILLIMETERS NOMINAL OVERALL |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED WIRE ERR-100 |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
SAE J516, 100R2, TYPE AT-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
6.0 KILOPASCALS |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.000 INCHES |