| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 2ND END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED, MIL-F-27272 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED, MIL-F-27272 |
| CQJX |
NOMINAL THREAD SIZE |
0.563 INCHES 1ST END |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.000 INCHES |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 304, COND A OR COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| CQJX |
NOMINAL THREAD SIZE |
0.563 INCHES 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-25579E,CLASS 1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
NAS1760 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AGAV |
END ITEM IDENTIFICATION |
OH-58D, HELICOPTER, OBSERVATION (AHIP) |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQBD |
BURST TEST PRESSURE |
6500.0 POUNDS PER SQUARE INCH |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, TETRAFLUOROETHYLENE REINFORCED |
| AARX |
INSIDE DIAMETER |
0.313 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
HOSE ASSEMBLY SHALL BE CERTIFIED TO FAA TSO-C53A, TYPE B - BY TSO TAG ATTACHED; PROCUREMENT - ANY SOURCE QUALIFIED TO MIL-H-25579; CAN BE FABRICATED FROM HOSE NSN 4720-00-8571731+ STRAIGHT FITTING NSN 4730-00-0530379 + ELBOW FITTING NSN 4730-00-0530380 |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.446 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 304, COND A OR COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HOSE ASSEMBLY, TFE, FLARELESS, HIGH TEMP, MEDIUM PRESSURE |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
NAS1760 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRXX |
MEASURING METHOD AND LENGTH |
25.000 INCHES NOMINAL WORKING |