| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND WEATHERPROOF AND OZONE RESISTANT |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
9.500 INCHES |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAE J516,TABLE-5A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGM |
MAXIMUM OPERATING PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
5TH LAYER SPIRALLY LAID STEEL WIRE ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY LAID STEEL WIRE ERR-100 |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| AFQN |
FLANGE LENGTH |
2.550 INCHES NOMINAL 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER MOLDED RUBBER ERR-100 |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| CQBD |
BURST TEST PRESSURE |
16000.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
PLAIN SWIVEL W/ GASKET GROOVE 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SPLIT 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, INVERTED FLARE 1ST END |
| ABKU |
FLANGE THICKNESS |
0.750 INCHES NOMINAL 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER SPIRALLY LAID STEEL WIRE ERR-100 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
4TH LAYER SPIRALLY LAID STEEL WIRE ERR-100 |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
SAE J517,100R12,TYPE-A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADJS |
EXTERIOR COLOR |
BLACK |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER ERR-100 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
0.875 INCHES NOMINAL 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516 TABLE 4L-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRXX |
MEASURING METHOD AND LENGTH |
111.000 INCHES NOMINAL OVERALL |
| AGFF |
FLANGE WIDTH |
1.880 INCHES NOMINAL 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AARX |
INSIDE DIAMETER |
0.750 INCHES NOMINAL |
| AHNX |
BOLT HOLE DIAMETER |
0.406 INCHES NOMINAL 2ND END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
2.000 INCHES NOMINAL 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ABKV |
OUTSIDE DIAMETER |
1.210 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
1.063 INCHES 1ST END |
| CTCJ |
FLANGE STYLE |
DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |