| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
SAE J517-100R2, TYPE AT-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, NITRILE ERR-100 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| AAJD |
THREAD CLASS |
1A 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
120.000 INCHES NOMINAL OVERALL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
C2AT 2-WIRE BRAID HOSE - SAE 100R2 TYPE AT - ASSEMBLY |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER MOLDED RUBBER, NITRILE ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER MOLDED RUBBER, NITRILE ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL BOSS 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.980 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
POWER UNIT AS |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAE J516, TABLE 2B - 81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AHNC |
CONNECTION STYLE |
EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516, TABLE 4L - 81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
7250.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 2ND END |
| FEAT |
SPECIAL FEATURES |
MEETS U.S. MSHA 2G FLAME RESISTANCE DESIGNATION; BOSS END SUPPORTSO'RING SEAL |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3625.0 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
14 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, NITRILE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| CMLP |
THREAD QUANTITY PER INCH |
14 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND FIRE RESISTANT AND OIL RESISTANT |
| CQCS |
LAYER COMPOSITION AND LOCATION |
4TH LAYER BRAIDED STEEL WIRE ERR-100 |
| ADJS |
EXTERIOR COLOR |
BLACK |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
8.000 INCHES |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AARX |
INSIDE DIAMETER |
0.625 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
2B 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| CQBD |
BURST TEST PRESSURE |
14500.0 POUNDS PER SQUARE INCH |
| CBBL |
FEATURES PROVIDED |
NONSKIVE |