| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
9.500 INCHES |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED WIRE ERR-100 |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
631001-2B-81381 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
2500KW MODULE GEN |
| FEAT |
SPECIAL FEATURES |
STAINLESS STEEL FITTINGS MAY BE SUBSTITUTED WITH ALL STEEL FITTINGS |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED POLYTETRAFLUOROETHYLENE ERR-100 |
| ABJH |
TEMP RATING |
160.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRXX |
MEASURING METHOD AND LENGTH |
37.000 INCHES NOMINAL OVERALL |
| ABKV |
OUTSIDE DIAMETER |
1.156 INCHES MINIMUM AND 1.219 INCHES MAXIMUM |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, INVERTED FLARE 1ST END |
| CQBD |
BURST TEST PRESSURE |
200.0 POUNDS PER SQUARE INCH |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516,TABLE4A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, TETRAFLUOROETHYLENE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
50.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE ERR-100 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AARX |
INSIDE DIAMETER |
0.750 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 316 |