| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQGM |
MAXIMUM OPERATING PRESSURE |
875.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516,FIG 6-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJD |
THREAD CLASS |
2B 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.808 INCHES MINIMUM AND 0.854 INCHES MAXIMUM |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TYPE AND 4 TABLE |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ABJH |
TEMP RATING |
-55.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
FUEL RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND MILDEW RESISTANT |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1750.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC W/CHROMATE |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AARX |
INSIDE DIAMETER |
0.500 INCHES MINIMUM AND 0.539 INCHES MAXIMUM |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-13444E GOVERNMENT SPECIFICATION |
| AGAV |
END ITEM IDENTIFICATION |
NSN 2320-01-447-6345 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13444E,TYPEIII STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBD |
BURST TEST PRESSURE |
3500.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
0.0 |
| CMLP |
THREAD QUANTITY PER INCH |
16 1ST END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC W/CHROMATE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.250 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
16 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER BRAIDED STEEL WIRE ERR-100 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC ERR-100 |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| AAJD |
THREAD CLASS |
2B 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
21.500 INCHES MINIMUM OVERALL AND 22.500 INCHES MAXIMUM OVERALL |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAE J516,FIG 7-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |