| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQGM |
MAXIMUM OPERATING PRESSURE |
875.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
0.808 INCHES MINIMUM AND 0.854 INCHES MAXIMUM |
| CRXX |
MEASURING METHOD AND LENGTH |
29.000 INCHES NOMINAL OVERALL |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS52103 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1750.0 POUNDS PER SQUARE INCH |
| AGAV |
END ITEM IDENTIFICATION |
5 TON TRUCK;2320-01-206-4089 |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 1ST END |
| AARX |
INSIDE DIAMETER |
0.500 INCHES MINIMUM AND 0.539 INCHES MAXIMUM |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13444 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
NPT 2ND END |
| CQBD |
BURST TEST PRESSURE |
3500.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.250 INCHES |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HOSE ASSEMBLY HIGH TEMP |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AAJD |
THREAD CLASS |
2B 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |