| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| AARX |
INSIDE DIAMETER |
1.125 INCHES MINIMUM AND 1.172 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2B 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED WIRE ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ABJH |
TEMP RATING |
-55.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD |
BURST TEST PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC W/CHROMATE |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED FABRIC ERR-100 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAEJ516-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| AGAV |
END ITEM IDENTIFICATION |
FAMILY OF MEDIUM TACTICAL VEHICLES-MEDIUM;2320013554332 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAEJ516-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UN 2ND END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HOSE ASSEMBLY,TRANSMISSION COOLER INLET |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC W/CHROMATE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.500 INCHES |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED TEXTILE YARN ERR-100 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| ABKV |
OUTSIDE DIAMETER |
1.456 INCHES MINIMUM AND 1.518 INCHES MAXIMUM |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13444,TYPE III STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRXX |
MEASURING METHOD AND LENGTH |
3087.0 MILLIMETERS MINIMUM OVERALL AND 3113.0 MILLIMETERS MAXIMUM OVERALL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AAJD |
THREAD CLASS |
2B 1ST END |
| CMLP |
THREAD QUANTITY PER INCH |
12 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
625.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |