| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED, MIL-A-8625, TYPE 2 |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD ERR-100 |
| ABJH |
TEMP RATING |
-67.0 DEG FAHRENHEIT SINGLE RESPONSE AND 158.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
UNTHREADED EXTERNAL HOSE 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQBD |
BURST TEST PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
0.469 INCHES NOMINAL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND OIL RESISTANT AND ALCOHOL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND WATER RESISTANT |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER MOLDED RUBBER ERR-100 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.000 INCHES |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CMLP |
THREAD QUANTITY PER INCH |
28 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
MK105 MOD 4, HELICOPTER INSTALLATION |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CWBZ |
SEAT NOMINAL RADIUS |
0.295 INCHES 1ST END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HOSE ASSY,VENT |
| CQGM |
MAXIMUM OPERATING PRESSURE |
200.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| AHNC |
CONNECTION STYLE |
STRAIGHT 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-5593C,SIZE 4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRDW |
HYDROSTATIC TEST PRESSURE |
400.0 POUNDS PER SQUARE INCH |
| SPCL |
SPECIAL TEST FEATURES |
LOW TEMPS AND LOW PRESSURE |
| CRXX |
MEASURING METHOD AND LENGTH |
114.000 INCHES MINIMUM OVERALL AND 126.000 INCHES MAXIMUM OVERALL |
| AARX |
INSIDE DIAMETER |
0.250 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024, T851 OR COMPLETE FITTING ALUMINUM ALLOY, QQ-A-225/9, ALLOY 7075, T73 OR COMPLETE FITTING ALUMINUM ALLOY, QQ-A-367, COMP 2014, T6 OR COMPLETE FITTING ALUMINUM ALLOY, QQ-A-367, COMP 7075, T73 |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ZZZK |
SPECIFICATION/STANDARD DATA |
53722-MIL-A-38726 GOVERNMENT SPECIFICATION |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS27404-4D SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |