| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED WIRE ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ABJH |
TEMP RATING |
-55.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CBBL |
FEATURES PROVIDED |
REUSABLE END FITTINGS |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.750 INCHES |
| CQBD |
BURST TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516 TABLE 3E-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.953 INCHES NOMINAL |
| MEDA |
MEDIA FOR WHICH DESIGNED |
WATER SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND AIR SINGLE RESPONSE |
| AAJD |
THREAD CLASS |
3B 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
67.000 INCHES NOMINAL OVERALL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
750.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED TEXTILE YARN ERR-100 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
2350-01-420-4716 |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-13444,TYPE III SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC ERR-100 |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AARX |
INSIDE DIAMETER |
0.625 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
1.063 INCHES 1ST END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS52103 GOVERNMENT STANDARD |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |