| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.304 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| CWFD |
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED |
0.250 INCHES 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CMLP |
THREAD QUANTITY PER INCH |
20 2ND END |
| AARX |
INSIDE DIAMETER |
0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| CWFD |
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED |
0.250 INCHES 2ND END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS33514 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| FEAT |
SPECIAL FEATURES |
BURST PRESSURE HIGH TEMP 7,000 PSI MIN |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.000 INCHES |
| TEST |
TEST DATA DOCUMENT |
96906-MS33514RRJA81349-MIL-S-8879 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 81349-MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END |
| AAJD |
THREAD CLASS |
3A 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HOSE ASSEMBLY, PERMANENTLY ATTACHED FITTINGS, TETRAFLUOROETHYLENE, HIGHTEMPERATURE, MEDIUM PRESSURE, FLARELESS TO FLARELESS |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, TETRAFLUOROETHYLENE |
| CQBD |
BURST TEST PRESSURE |
12000.0 POUNDS PER SQUARE INCH |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 2ND END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 500.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CWDW |
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED |
0.188 INCHES 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
10.000 INCHES NOMINAL WORKING |
| CQJX |
NOMINAL THREAD SIZE |
0.4375 INCHES 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ABKU |
FLANGE THICKNESS |
0.035 INCHES MINIMUM 1ST END AND 0.047 INCHES MAXIMUM 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CWDW |
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED |
0.188 INCHES 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.4375 INCHES 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CMLP |
THREAD QUANTITY PER INCH |
20 1ST END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS8006 GOVERNMENT STANDARD |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MS33514 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |