| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ABJH |
TEMP RATING |
275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
30.050 INCHES MINIMUM OVERALL AND 30.550 INCHES MAXIMUM OVERALL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBD |
BURST TEST PRESSURE |
12000.0 POUNDS PER SQUARE INCH |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQJX |
NOMINAL THREAD SIZE |
1.625 INCHES 1ST END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| ABKV |
OUTSIDE DIAMETER |
1.560 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| AGAV |
END ITEM IDENTIFICATION |
MOUNT, SUPER RAPID GUN, 76/62 MM. |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.625 INCHES 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| FEAT |
SPECIAL FEATURES |
TEMPERATURE RATING IS MAXIMUM; BURST TEST PRESSURE AT HIGH TEMPERATURE IS 9000.0 PSI. MINIMUM; CAN ALSO BE USED IN SOME PNEUMATIC SYSTEMS WHICH ALLOW SOME GASEOUS DIFFUSION THROUGH HOSE WALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
12.000 INCHES |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CMLP |
THREAD QUANTITY PER INCH |
12 2ND END |
| AARX |
INSIDE DIAMETER |
1.101 INCHES MINIMUM |