| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AGAV |
END ITEM IDENTIFICATION |
WATERJET HJ241, FREEZER |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| THSD |
THREAD SERIES DESIGNATOR |
BSP.PL 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| AARX |
INSIDE DIAMETER |
0.375 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
BSP.PL 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 2ND END |
| FEAT |
SPECIAL FEATURES |
CLEANED BY AIR MATE SYSTEM |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
10000.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 1ST END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
315.0 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER BRAIDED WIRE ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.750 INCHES NOMINAL |
| CRXX |
MEASURING METHOD AND LENGTH |
415.0 MILLIMETERS NOMINAL EXCLUDING END FITTINGS |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED WIRE ERR-100 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBD |
BURST TEST PRESSURE |
20000.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 2ND END |
| CQRB |
SEAT ANGLE |
60.0 DEGREES 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CQRB |
SEAT ANGLE |
60.0 DEGREES 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |