| ADLG |
FIRST END FITTING SPEC/STD DATA |
J516 SIZE 24-24-0U583 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQJX |
NOMINAL THREAD SIZE |
1.875 INCHES 1ST END |
| CQBD |
BURST TEST PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
1.875 INCHES 2ND END |
| AAJD |
THREAD CLASS |
1A 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ABJH |
TEMP RATING |
-55.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRXX |
MEASURING METHOD AND LENGTH |
27.000 INCHES NOMINAL WORKING |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED TEXTILE YARN ERR-100 |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, FLUORO-ELASTOMER |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.500 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UN 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
0.0 |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| AAJD |
THREAD CLASS |
2A 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED TEXTILE YARN ERR-100 |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
INCLUDED |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| AGAV |
END ITEM IDENTIFICATION |
BRADLEY FIGHTING VEHICLE |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HOSE ASSEMBLY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 2ND END |
| AARX |
INSIDE DIAMETER |
1.875 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
12 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
2.125 INCHES NOMINAL |