| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC ERR-100 |
| AARX |
INSIDE DIAMETER |
0.375 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.625 INCHES 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| AAJD |
THREAD CLASS |
2B 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-3992, TYPE 1.MIL-H-3992, TYPE 1CLASS 1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CMLP |
THREAD QUANTITY PER INCH |
18 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
711.2 MILLIMETERS NOMINAL OVERALL |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAE J516.-6 3014XX STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| MEDA |
MEDIA FOR WHICH DESIGNED |
AIR SINGLE RESPONSE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
18 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
150.0 POUNDS PER SQUARE INCH |
| AGAV |
END ITEM IDENTIFICATION |
2330-01-507-7887 |
| ABKV |
OUTSIDE DIAMETER |
0.781 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQJX |
NOMINAL THREAD SIZE |
0.625 INCHES 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AAJD |
THREAD CLASS |
2B 1ST END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516.-6 3001XX STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBD |
BURST TEST PRESSURE |
900.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |