| ACLT |
SECOND END STYLE DESIGNATOR |
FLARED |
| MATT |
MATERIAL |
STEEL COMP 347 |
| ABHP |
OVERALL LENGTH |
1.495 INCHES MINIMUM AND 1.565 INCHES MAXIMUM |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNF |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| BBDF |
WRENCHING FEATURE STYLE |
HEXAGON |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| ACMS |
SECOND END THREAD DIRECTION |
RIGHT-HAND |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
0.423 INCHES MINIMUM AND 0.428 INCHES MAXIMUM |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| CRCN |
SECOND END SEAT ANGLE |
37.0 DEGREES NOMINAL |
| CRNB |
SECOND END NOMINAL THREAD SIZE |
0.438 INCHES |
| ATLF |
SECOND END THREAD LENGTH |
0.267 INCHES NOMINAL |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
0.535 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| ASDB |
WIDTH ACROSS FLATS |
0.750 INCHES NOMINAL |
| AAQL |
BODY STYLE |
BODY WRENCHING |
| CRPF |
SECOND END THREAD SERIES DESIGNATOR |
UNF |
| ATKZ |
FIRST END THREAD LENGTH |
0.335 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| CQYM |
FIRST END NOMINAL THREAD SIZE |
0.438 INCHES |
| ACKN |
FIRST END STYLE DESIGNATOR |
PLAIN |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ACLS |
SECOND END CONNECTION TYPE |
THREADED EXTERNAL TUBE |
| ACKM |
FIRST END CONNECTION TYPE |
THREADED EXTERNAL TUBE |
| ACLK |
FIRST END THREAD CLASS |
3A |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
0.435 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ACMR |
SECOND END THREAD CLASS |
3A |