| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNF |
| CQYM |
FIRST END NOMINAL THREAD SIZE |
1.000 INCHES |
| CRMX |
SECOND END THREAD QUANTITY PER INCH |
20 |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
7.063 INCHES NOMINAL |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.437 INCHES NOMINAL |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.147 INCHES NOMINAL |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
1.121 INCHES MINIMUM AND 1.122 INCHES MAXIMUM |
| BBDF |
WRENCHING FEATURE STYLE |
HEXAGON |
| ATKZ |
FIRST END THREAD LENGTH |
0.742 INCHES NOMINAL |
| ACMS |
SECOND END THREAD DIRECTION |
RIGHT-HAND |
| CQKK |
FIRST END THREAD QUANTITY PER INCH |
14 |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| ABHP |
OVERALL LENGTH |
8.140 INCHES NOMINAL |
| CRNB |
SECOND END NOMINAL THREAD SIZE |
0.500 INCHES |
| AAQL |
BODY STYLE |
SHOULDER |
| ATLF |
SECOND END THREAD LENGTH |
0.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.063 INCHES NOMINAL |
| CRPF |
SECOND END THREAD SERIES DESIGNATOR |
UNF |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
7.875 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
42.0 ROCKWELL C MAXIMUM |
| BBKK |
DISTANCE FROM BOLT END TO HOLE CENTER |
0.214 INCHES NOMINAL |
| AAWX |
CONCENTRIC HOLE DEPTH |
7.188 INCHES NOMINAL |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
7.128 INCHES MINIMUM AND 7.138 INCHES MAXIMUM |
| BBKM |
SECOND DIAMETER FROM WRENCHING FEATURE |
1.062 INCHES NOMINAL |
| BBKS |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER |
7.195 INCHES NOMINAL |
| ASDB |
WIDTH ACROSS FLATS |
1.500 INCHES NOMINAL |
| ACLK |
FIRST END THREAD CLASS |
3A |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.250 INCHES NOMINAL |
| ACMR |
SECOND END THREAD CLASS |
3B |
| MATT |
MATERIAL |
STEEL COMP 4340 |
| SFTT |
SURFACE TREATMENT |
CADMIUM |