| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
1.110 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
FSCM 82577-H+4-169 MFR REF SINGLE TREATMENT RESPONSE |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNF |
| MATT |
MATERIAL |
STEEL COMP 303SE |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AAWX |
CONCENTRIC HOLE DEPTH |
1.130 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |
| CQYM |
FIRST END NOMINAL THREAD SIZE |
0.250 INCHES |
| ABHP |
OVERALL LENGTH |
1.350 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| BBDF |
WRENCHING FEATURE STYLE |
ROUND WITH WRENCH FLATS |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| ATKZ |
FIRST END THREAD LENGTH |
0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AASY |
DISTANCE FROM CENTERLINE TO FLAT |
0.153 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| ACKN |
FIRST END STYLE DESIGNATOR |
PLAIN |
| AAQL |
BODY STYLE |
PLAIN |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
1.318 INCHES MAXIMUM |
| ACLK |
FIRST END THREAD CLASS |
2A |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ACKM |
FIRST END CONNECTION TYPE |
THREADED EXTERNAL TUBE |