| ACKN |
FIRST END STYLE DESIGNATOR |
FLARELESS |
| BBKM |
SECOND DIAMETER FROM WRENCHING FEATURE |
0.433 INCHES NOMINAL |
| ACLT |
SECOND END STYLE DESIGNATOR |
FLARELESS |
| ASDB |
WIDTH ACROSS FLATS |
0.871 INCHES MINIMUM AND 0.878 INCHES MAXIMUM |
| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNJF |
| ATKZ |
FIRST END THREAD LENGTH |
0.956 INCHES NOMINAL |
| BBKP |
FOURTH DIAMETER FROM WRENCHING FEATURE |
0.433 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
4.068 INCHES NOMINAL |
| BGST |
PRESSURE RATING |
3000.0 POUNDS PER SQUARE INCH NOMINAL |
| BBDF |
WRENCHING FEATURE STYLE |
HEXAGON |
| ATLF |
SECOND END THREAD LENGTH |
0.386 INCHES NOMINAL |
| CRCN |
SECOND END SEAT ANGLE |
12.0 DEGREES NOMINAL |
| BBKN |
THIRD DIAMETER FROM WRENCHING FEATURE |
0.499 INCHES NOMINAL |
| CPHW |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SIXTH DIAMETER |
2.206 INCHES NOMINAL |
| ACMS |
SECOND END THREAD DIRECTION |
RIGHT-HAND |
| BBLC |
DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT |
1.622 INCHES NOMINAL |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| BBKS |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER |
0.726 INCHES NOMINAL |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.189 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
0.499 INCHES NOMINAL |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.437 INCHES NOMINAL |
| CRNB |
SECOND END NOMINAL THREAD SIZE |
0.562 INCHES |
| BBKZ |
SECOND RADIAL FLUID HOLE DIAMETER |
0.189 INCHES NOMINAL |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
2.622 INCHES NOMINAL |
| BBKQ |
FIFTH DIAMETER FROM WRENCHING FEATURE |
0.499 INCHES NOMINAL |
| BBKX |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER |
2.034 INCHES NOMINAL |
| AAQL |
BODY STYLE |
BODY WRENCHING |
| BBKT |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER |
1.354 INCHES NOMINAL |
| CPHT |
SIXTH DIAMETER FROM WRENCHING FEATURE |
0.363 INCHES NOMINAL |
| CQYM |
FIRST END NOMINAL THREAD SIZE |
0.438 INCHES |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
3.162 INCHES NOMINAL |
| CRPF |
SECOND END THREAD SERIES DESIGNATOR |
UNJF |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
0.425 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6,T6,T62 OR T851 FED SPEC SINGLE MATERIAL RESPONSE |
| ACLS |
SECOND END CONNECTION TYPE |
THREADED EXTERNAL TUBE |
| CQPR |
FIRST END SEAT ANGLE |
12.0 DEGREES NOMINAL |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.234 INCHES NOMINAL |
| ACKM |
FIRST END CONNECTION TYPE |
THREADED EXTERNAL TUBE |
| BBKW |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER |
1.666 INCHES NOMINAL |
| ACLK |
FIRST END THREAD CLASS |
3A |
| ACMR |
SECOND END THREAD CLASS |
3A |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS21941 GOVERNMENT STANDARD |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |