| FEAT |
SPECIAL FEATURES |
WRENCHING END THREADS HAS ONE HOLE 0.078IN.DIA THRU |
| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNF |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.540 INCHES NOMINAL |
| ATKZ |
FIRST END THREAD LENGTH |
0.710 INCHES NOMINAL |
| CRMX |
SECOND END THREAD QUANTITY PER INCH |
24 |
| BBKP |
FOURTH DIAMETER FROM WRENCHING FEATURE |
0.660 INCHES MINIMUM AND 0.662 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| BBKS |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER |
1.680 INCHES NOMINAL |
| BBKT |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER |
2.720 INCHES NOMINAL |
| BBDF |
WRENCHING FEATURE STYLE |
HEXAGON |
| CRNB |
SECOND END NOMINAL THREAD SIZE |
0.312 INCHES |
| ACMS |
SECOND END THREAD DIRECTION |
RIGHT-HAND |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.180 INCHES NOMINAL |
| BBKW |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER |
4.310 INCHES NOMINAL |
| CQKK |
FIRST END THREAD QUANTITY PER INCH |
16 |
| BBKM |
SECOND DIAMETER FROM WRENCHING FEATURE |
0.665 INCHES NOMINAL |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| ASDB |
WIDTH ACROSS FLATS |
0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.144 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
0.309 INCHES NOMINAL |
| BBKN |
THIRD DIAMETER FROM WRENCHING FEATURE |
0.758 INCHES NOMINAL |
| AAQL |
BODY STYLE |
BODY WRENCHING |
| CRPF |
SECOND END THREAD SERIES DESIGNATOR |
UNF |
| ABHP |
OVERALL LENGTH |
6.170 INCHES MINIMUM AND 6.180 INCHES MAXIMUM |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
1.052 INCHES MINIMUM AND 1.062 INCHES MAXIMUM |
| CQYM |
FIRST END NOMINAL THREAD SIZE |
0.750 INCHES |
| ACLK |
FIRST END THREAD CLASS |
3A |
| ACMR |
SECOND END THREAD CLASS |
3A |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
5.020 INCHES NOMINAL |
| ATLF |
SECOND END THREAD LENGTH |
0.615 INCHES NOMINAL |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
0.180 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM |