| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
1.188 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/5 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/4 FED SPEC 2ND MATERIAL RESPONSE |
| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNF |
| CQPR |
FIRST END SEAT ANGLE |
45.0 DEGREES NOMINAL |
| ATKZ |
FIRST END THREAD LENGTH |
0.437 INCHES NOMINAL |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
0.781 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| BBDF |
WRENCHING FEATURE STYLE |
HEXAGON |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.188 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
1.375 INCHES NOMINAL |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
0.435 INCHES NOMINAL |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| ZZZX |
DEPARTURE FROM CITED DESIGNATOR |
THIS BOLT IS IDENTICAL TO AN775-4 BOLT WITH THE EXCEPTION OF TWO DRILLED HOLES IN HEAD FOR LOCKWIRE |
| CQKK |
FIRST END THREAD QUANTITY PER INCH |
20 |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AAWX |
CONCENTRIC HOLE DEPTH |
1.156 INCHES NOMINAL |
| CQYM |
FIRST END NOMINAL THREAD SIZE |
0.437 INCHES |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
0.750 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY |
| ASDB |
WIDTH ACROSS FLATS |
0.688 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
TWO 0.946 IN. DIA LOCKWIRE HOLE DRILLED IN HEAD |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.172 INCHES NOMINAL |
| AAQL |
BODY STYLE |
PLAIN |
| ACKM |
FIRST END CONNECTION TYPE |
THREADED EXTERNAL TUBE |
| ACLK |
FIRST END THREAD CLASS |
3A |
| ACKN |
FIRST END STYLE DESIGNATOR |
FLARED |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.188 INCHES NOMINAL |