| CWDF |
FLANGE FACE DESIGN |
RAISED SWIVEL 1ST END |
| CWDH |
RAISED FACE NOMINAL HEIGHT |
0.020 INCHES 1ST END |
| AHNC |
CONNECTION STYLE |
GRIPPING NIPPLE (NOSE) 2ND END |
| MATT |
MATERIAL |
STEEL COMP 321 ELBOW |
| CWCK |
NOMINAL THICKNESS |
0.234 INCHES 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH 2ND RESPONSE |
| MATT |
MATERIAL |
STEEL COMP 321 SHOULDER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-T-8808 COND A MIL SPEC SINGLE MATERIAL RESPONSE ELBOW |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL HOSE GRIPPING 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES |
| SFTT |
SURFACE TREATMENT |
PASSIVATE INSIDE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS27066 GOVERNMENT STANDARD |
| MATT |
MATERIAL |
STEEL COMP 304 FLANGE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE FLANGE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-27272 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE |
| AKGG |
NOMINAL LENGTH |
1.750 INCHES 1ST END |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-F-27272 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE |
| ARKN |
FLANGE SHAPE |
RECTANGULAR WITH HOLES 1ST END |
| CWDL |
RAISED FACE NOMINAL DIAMETER |
1.500 INCHES 1ST END |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OUTSIDE |
| AKGF |
NOMINAL WIDTH |
1.750 INCHES 1ST END |
| AWLS |
CONNECTION TYPE |
FLANGE 1ST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE NIPPLE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1250.0 POUNDS PER SQUARE INCH 1ST RESPONSE |
| CWCY |
CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.312 INCHES 1ST END |
| AHSJ |
LEG LENGTH |
2.631 INCHES NOMINAL 2ND END |
| AEHZ |
MAXIMUM OPERATING TEMP |
232.0 DEG CELSIUS SINGLE RESPONSE |
| CWCQ |
BOLT HOLE NOMINAL DIAMETER |
0.205 INCHES 1ST END |
| CWDZ |
NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED |
1.150 INCHES 2ND END |
| MATT |
MATERIAL |
STEEL COMP 304 UNION |
| CWDW |
NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED |
0.900 INCHES 2ND END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
WATER-OIL-GAS 1ST RESPONSE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE SHOULDER |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL 2ND RESPONSE |
| AHSJ |
LEG LENGTH |
1.279 INCHES NOMINAL 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| MATT |
MATERIAL |
STEEL COMP 321 NIPPLE |
| CWDC |
CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.312 INCHES 1ST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE UNION |