| AAXC |
CONCENTRIC HOLE DIAMETER |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CRMX |
SECOND END THREAD QUANTITY PER INCH |
20 |
| CRNB |
SECOND END NOMINAL THREAD SIZE |
0.250 INCHES |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| BBKS |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER |
0.890 INCHES MINIMUM AND 0.930 INCHES MAXIMUM |
| BBDF |
WRENCHING FEATURE STYLE |
HEXAGON |
| ACMS |
SECOND END THREAD DIRECTION |
RIGHT-HAND |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
0.960 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
0.430 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
0.244 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| CRPF |
SECOND END THREAD SERIES DESIGNATOR |
UNC |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AAWX |
CONCENTRIC HOLE DEPTH |
0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| ATLF |
SECOND END THREAD LENGTH |
0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| ACLT |
SECOND END STYLE DESIGNATOR |
PLAIN |
| ASDB |
WIDTH ACROSS FLATS |
0.362 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
PLAIN |
| ABHP |
OVERALL LENGTH |
1.130 INCHES MINIMUM AND 1.170 INCHES MAXIMUM |
| ACMR |
SECOND END THREAD CLASS |
2A |