| CQMM |
FIRST END THREAD SERIES DESIGNATOR |
UNF |
| BBKM |
SECOND DIAMETER FROM WRENCHING FEATURE |
1.532 INCHES NOMINAL |
| AAWX |
CONCENTRIC HOLE DEPTH |
0.938 INCHES NOMINAL |
| BBKN |
THIRD DIAMETER FROM WRENCHING FEATURE |
ANY ACCEPTABLE |
| ABHP |
OVERALL LENGTH |
1.406 INCHES NOMINAL |
| BBKS |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER |
0.406 INCHES NOMINAL |
| BBDF |
WRENCHING FEATURE STYLE |
HEXAGON |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.188 INCHES NOMINAL |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
1.156 INCHES NOMINAL |
| ATKZ |
FIRST END THREAD LENGTH |
0.219 INCHES NOMINAL |
| ACLL |
FIRST END THREAD DIRECTION |
RIGHT-HAND |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
0.844 INCHES NOMINAL |
| CQKK |
FIRST END THREAD QUANTITY PER INCH |
20 |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
0.589 INCHES MINIMUM AND 0.592 INCHES MAXIMUM |
| BBKZ |
SECOND RADIAL FLUID HOLE DIAMETER |
0.656 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| ASDB |
WIDTH ACROSS FLATS |
0.750 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633,COMP C1112 FED SPEC SINGLE MATERIAL RESPONSE |
| BBKT |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER |
0.406 INCHES NOMINAL |
| ACKN |
FIRST END STYLE DESIGNATOR |
PLAIN |
| CQYM |
FIRST END NOMINAL THREAD SIZE |
0.500 INCHES |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
0.312 INCHES NOMINAL |
| BBLC |
DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT |
ANY ACCEPTABLE |
| ACLK |
FIRST END THREAD CLASS |
2A |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.250 INCHES NOMINAL |
| ACKM |
FIRST END CONNECTION TYPE |
THREADED EXTERNAL TUBE |
| AAQL |
BODY STYLE |
RELIEVED |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.250 INCHES NOMINAL |