| CSDC |
OPENING PRESSURE SETTING |
725.0 POUNDS PER SQUARE INCH |
| ARKN |
FLANGE SHAPE |
ROUND WITH HOLES 2ND END |
| CCFG |
VALVE SIZE |
2.500 INCHES |
| CWDF |
FLANGE FACE DESIGN |
PLAIN 1ST END |
| CWDF |
FLANGE FACE DESIGN |
PLAIN 2ND END |
| CBBL |
FEATURES PROVIDED |
PRESSURE TIGHT OUTLET SIDE |
| ADST |
BONNET ATTACHMENT METHOD |
BOLTED |
| CWCQ |
BOLT HOLE NOMINAL DIAMETER |
0.812 INCHES 1ST END |
| AECS |
BOLT HOLE QUANTITY |
8 2ND END |
| CWCQ |
BOLT HOLE NOMINAL DIAMETER |
0.812 INCHES 2ND END |
| ADZH |
RENEWABLE SEAT RING TYPE |
THREADED |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
8.688 INCHES 1ST END |
| ADQU |
FLOW CONTROL DEVICE |
DISK |
| AQLR |
VALVE OPERATION METHOD |
AUTOMATIC OR MANUAL |
| CWCT |
BOLT CIRCLE NOMINAL DIAMETER |
7.125 INCHES 1ST END |
| FEAT |
SPECIAL FEATURES |
THE END CONNECTION IDENTIFIED ABOVE AS THE SECOND END IS THE VALVE INLET |
| AWLS |
CONNECTION TYPE |
FLANGE 1ST END |
| STYL |
STYLE DESIGNATOR |
ERR-090 |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY THE VALVE DISCHARGE FLOW RATE REQUIREMENT |
| CWCT |
BOLT CIRCLE NOMINAL DIAMETER |
5.875 INCHES 2ND END |
| ADSU |
DISK LOADING METHOD |
SPRING |
| AECS |
BOLT HOLE QUANTITY |
9 1ST END |
| ADSY |
VALVE DISCHARGE FLOW RATE |
61500.0 POUNDS PER HOUR |
| ADSR |
BONNET TYPE |
EXPOSED SPRING |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
7.500 INCHES 2ND END |
| ARKN |
FLANGE SHAPE |
ROUND WITH HOLES 1ST END |
| AWLS |
CONNECTION TYPE |
FLANGE 2ND END |