| SFTT |
SURFACE TREATMENT |
NICKEL OVERALL AND ZINC OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
0.808 INCHES MINIMUM FIRST HOLE AND 0.858 INCHES MAXIMUM FIRST HOLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
LA0109-005,FSCM 43999 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
HB0160-001 TY 2 H-11,FSCM 43999 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AASL |
HEAD DIAMETER |
0.552 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
260000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| FEAT |
SPECIAL FEATURES |
RECESS PAINTED WITH ALUMINUM SILICONE NA2-1315 TYPE 2 43999 |
| AASA |
THREAD LENGTH |
0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| MATT |
MATERIAL |
STEEL OVERALL |
| AAUR |
GRIP DIAMETER |
0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASB |
FASTENER LENGTH |
0.938 INCHES MINIMUM AND 0.968 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AAWU |
SINGLE SHEAR STRENGTH |
17250 POUNDS PER SQUARE INCH |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| AASU |
HEAD HEIGHT |
0.191 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |