| AASB |
FASTENER LENGTH |
3.063 INCHES NOMINAL |
| AAVA |
POINT DIAMETER |
0.539 INCHES MINIMUM AND 0.549 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| AASU |
HEAD HEIGHT |
0.625 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| AAJD |
THREAD CLASS |
3A |
| AAUB |
HOLE DIAMETER |
0.070 INCHES NOMINAL |
| AAUY |
POINT LENGTH |
0.125 INCHES NOMINAL |
| ABQZ |
INTERNAL DRIVE STYLE |
W/O INTERNAL DRIVE |
| ABQJ |
POINT STYLE |
FLAT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AATC |
EXTENDED WASHER DIAMETER |
1.903 INCHES NOMINAL |
| ASXK |
HOLE QUANTITY |
1 |
| AATD |
EXTENDED WASHER THICKNESS |
0.187 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CWDK |
POINT CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AASA |
THREAD LENGTH |
1.156 INCHES MINIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
| AASK |
HEAD STYLE |
HEXAGON EXTENDED WASHER |
| AATB |
WIDTH BETWEEN FLATS |
0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |