| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| AAWK |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER |
0.921 INCHES NOMINAL |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.116 INCHES MINIMUM AND 0.118 INCHES MAXIMUM |
| AAWF |
FOURTH DIAMETER FROM HEAD |
0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| AAWJ |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER |
0.092 INCHES NOMINAL |
| AAWG |
FIFTH DIAMETER FROM HEAD |
0.139 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| AAWM |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER |
1.123 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.266 INCHES MINIMUM |
| AASU |
HEAD HEIGHT |
0.423 INCHES NOMINAL |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
5 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAWE |
THIRD DIAMETER FROM HEAD |
0.125 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
2A |
| AAWD |
SECOND DIAMETER FROM HEAD |
0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
1.812 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AAWL |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER |
0.983 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |