| THSD |
THREAD SERIES DESIGNATOR |
UNJC |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| ASXK |
HOLE QUANTITY |
2 |
| AASL |
HEAD DIAMETER |
0.221 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
TORQUE SET |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| CYBG |
HEAD HOLE CONFIGURATION STYLE |
ROUND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| AASA |
THREAD LENGTH |
0.282 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CYAU |
SCREW MATERIAL |
STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 4037 |
| AAUB |
HOLE DIAMETER |
0.038 INCHES NOMINAL |
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE |
| AASB |
FASTENER LENGTH |
0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CYBA |
SCREW SURFACE TREATMENT |
CADMIUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.138 INCHES |
| AASU |
HEAD HEIGHT |
0.074 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |