| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| ABQZ |
INTERNAL DRIVE STYLE |
SLOT |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.137 INCHES MINIMUM AND 0.139 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FILLISTER |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASB |
FASTENER LENGTH |
0.359 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASU |
HEAD HEIGHT |
0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ASXK |
HOLE QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| AASL |
HEAD DIAMETER |
0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8740 OVERALL |
| AAJD |
THREAD CLASS |
2A |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.046 INCHES NOMINAL |
| BQDM |
HOLE TYPE |
DRILLED |
| AASA |
THREAD LENGTH |
0.198 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
ROUND |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |