| AASB |
FASTENER LENGTH |
1.438 INCHES MINIMUM AND 1.484 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| CYAU |
SCREW MATERIAL |
STEEL COMP 4130 OR STEEL COMP 8735 OR STEEL COMP 8630 OR STEEL COMP 8740 |
| AASA |
THREAD LENGTH |
0.697 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CYAW |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE |
| CYBE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
125000 POUNDS PER SQUARE INCH |
| CYBA |
SCREW SURFACE TREATMENT |
CHROMATE AND CADMIUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AASL |
HEAD DIAMETER |
0.919 INCHES MINIMUM AND 1.017 INCHES MAXIMUM |