| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| MATT |
MATERIAL |
STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| AASL |
HEAD DIAMETER |
0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.249 INCHES MINIMUM AND 1.296 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
1.052 INCHES MINIMUM FIRST HOLE AND 1.072 INCHES MAXIMUM FIRST HOLE |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.614 INCHES MINIMUM AND 0.634 INCHES MAXIMUM |
| AAWU |
SINGLE SHEAR STRENGTH |
105000 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS336 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASA |
THREAD LENGTH |
0.615 INCHES MINIMUM AND 0.682 INCHES MAXIMUM |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.106 INCHES NOMINAL FIRST HOLE |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| AAUR |
GRIP DIAMETER |
0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |