| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| ANEE |
GRIP LENGTH |
0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| AAJD |
THREAD CLASS |
3A |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES GRIP |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
1.286 INCHES MINIMUM AND 1.316 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.276 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| CMLP |
THREAD QUANTITY PER INCH |
32 |