| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS335 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASL |
HEAD DIAMETER |
1.625 INCHES MINIMUM AND 1.635 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL COMP 6150 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| ANEE |
GRIP LENGTH |
1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AAUR |
GRIP DIAMETER |
0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| ASDB |
WIDTH ACROSS FLATS |
0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
HEXAGON |
| AASB |
FASTENER LENGTH |
2.077 INCHES MINIMUM AND 2.124 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |