| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AAVW |
WASHER QUANTITY |
1 |
| CTHW |
PRIMARY WASHER STYLE |
FLAT EXTERNAL TEETH |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL OR ZINC OVERALL |
| CTJJ |
PRIMARY WASHER MATERIAL THICKNESS |
0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1060 OVERALL OR STEEL COMP 1050 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1010 OVERALL OR STEEL COMP 1552 OVERALL OR STEEL COMP 1011 OVERALL OR STEEL COMP 1013 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1053 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1551 OVERALL OR STEEL COMP 1561 OVERALL OR STEEL COMP 1055 OVERALL OR STEEL COMP 1566 OVERALL |
| CSPG |
PRIMARY WASHER OUTSIDE DIAMETER |
0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASL |
HEAD DIAMETER |
0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| AASB |
FASTENER LENGTH |
0.500 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AAJD |
THREAD CLASS |
2A |
| AASA |
THREAD LENGTH |
0.361 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE ASSN STD ALL MATERIAL RESPONSES OVERALL |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM PRIMARY WASHER AND 50.0 ROCKWELL C MAXIMUM PRIMARY WASHER |